Grass Valley 8900GEN-SM - Manual (Page 29)

8900GEN-SM — Instruction Manual 29
8900GEN-SM Applications
5. Set the following parameters under Genlock Control on the Genlock
web page for slot 3:
• Genlock – Enabled
• Input Selection Standard – set to match the reference input exactly
if possible or set to one of the compatible rates given in
Table 1 on
page 9 .
Note Set this pulldown to the same frame rate as the pulldown on the slot 1
Genlock page.
• Loop Bandwidth – Fast Lock
6. Under Genlock Bus Timing, set all the timing controls (Line Offset,
Coarse Offset (37ns), and Fine Offset) to 0 (zero).
7. Set the Drive Frame Reference Bus to Auto .
8. On the Genlock web page, verify that the header reports the Status as
Locked and the Output Bus as Ref 2 .