Grass Valley 2040RDA - Manual (Page 17)

2040RDA — Instruction Manual 17
Configuration
Module Configuration Displays
The 2000 GUI provides the following links and displays for the 2040RDA
module (see
Figure 8 ):
• Status and Slot Configuration displays showing module status and slot
configuration information (location and user assigned names), and
• Standard Selection and Recall displays.
The Module Status and Slot Configuration displays are the same for all
remote controllable 2000 modules. Refer to the 2000NET manual for more
information on these displays. Some functions listed may not be supported
by a particular module. These will be indicated as not supported.
Figure 8. 2040RDA Display Links
Standard Selection and Recall Displays
This section discusses the Standard Selection and Recall Factory Defaults
Displays available to set and monitor the 2040RDA module parameters
remotely.
Software Updating
Remote software updating is not possible on the 2040RDA module. Soft-
ware updating requires a cable assembly and kit available from Grass
Valley Customer Service (8900-FLOAD-CBL). Refer to the 2000NET
manual and the Thomson Grass Valley web site at
http://www.thomsongrassvalley.com for complete details.