Grass Valley 2040RDA - Manual (Page 10)

10 2040RDA — Instruction Manual
Installation
Installation
Installation of the 2040RDA module is a process of:
• Placing the Coax PRM (passive rear module) in a frame slot,
• Placing the front media module in the corresponding front slot, and
• Cabling signal ports.
The 2040RDA module can be plugged in and removed from a Kameleon
2000 Series frame with power on. When power is applied to the module,
LED indicators reflect the initialization process (see
Power Up on page 13 ).
Module Placement in the 2000 Frame
There are twelve media module slot locations in the 3 RU frame to accom-
modate either analog or digital modules. The 2040RDA consists of a two
module set with a 2040RDA front media module and a Coax PRM passive
rear connector module that can be plugged into any of the 12 frame slots.
Each 2040RDA media module plugs into the front of the 2000 Series frame
mid-plane as illustrated in
Figure 1 . The Passive Rear module plugs into
the corresponding rear media slot to provide the input and output interface
connectors.
Figure 1. 2000 Series Frame, Front Slots
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(1)
Front Media Modules
Slots 1-12
8029-04