Grass Valley 2010RDA-16 - Manual (Page 19)

2010RDA-16 Instruction Manual 19
Remote Monitoring
Input Status Output Mode Page
The Input Status Output Mode page ( Figure 11 ) provides the following
status reporting items for the module:
• Mode indicates whether the on-board jumper is configured for Single , or
Dual output mode. (Refer to Local Onboard Module Configuration on
page 8 .)
• Rear Module Status reports that the Coax passive rear module ( PRM-Coax )
is installed.
• Channel Lock indicates whether each channel is Locked (valid AES signal
is present and module is locked to it) or Unlocked (module does not
detect a valid AES signal).
• Sample Rate indicates the current input sample rate being detected by
each channel as one of the following: Out of Range, 32K , 44.1K , 48K , or 96K .
Figure 11. 2010RDA-16 Input Status/Output Mode Display
Use
this
link