Grass Valley 2010RDA-16 - Manual (Page 16)

16 2010RDA-16 Instruction Manual
Remote Monitoring
Remote Monitoring
Monitoring of the 2010RDA-16 can be performed remotely using the
2000NET interface (see
Figure 8 ) or the Newton control panel. This section
describes the GUI access to the module functions. Refer to the 2000NET
Network Interface Module Instruction Manual for information on setting up
and operating the 2000 frame network.
Note The physical appearance of the menu displays shown in this manual repre-
sent the use of a particular platform, browser and version of 2000NET
module software. They are provided for reference only. Displays will differ
depending on the type of platform and browser you are using and the version
of the 2000NET software installed in your system.
The 2000 modules can be addressed by clicking on a specific module icon
in the frame status display or on a module name or slot number in the link
list on the left.
Figure 8. 2000NET GUI
8268_11
The Links section lists the frame and its current modules. The selected link's Status
page is first displayed and the sub-list of links for the selection is opened. The sub-list
allows you to select a particular information page for the selected device.
Content display section displays the information page
for the selected frame or module (frame slot icons are also
active links).
Online Manual Link
Refresh button for manual
update of page