Grass Valley 2010RDA-16 - Manual (Page 14)

14 2010RDA-16 Instruction Manual
Power Up
Power Up
The front LED indicators and configuration jumper are illustrated in
Figure 7 . Upon power-up, the green PWR LED should light and the yellow
CONF LED should illuminate for the duration of module initialization.
Operation Indicator LEDs
With valid input signal(s) connected, the green PWR LED and the green
LOCK LED 1 (and LOCK 2 for dual mode) should be on for each audio
input.
Figure 7. Operation Indicator LEDs
8268_07
LOCK1
FA
U
LT
COMM
CONF
PWR
LOCK2
FAULT (red)
COMM (yellow)
CONF (yellow)
PWR (green)
LOCK 1 (green) Single Mode
LOCK 2 (green) Dual Mode