H3C Technologies H3C VMSG VFW1000 User Manual
Page 60

55
•
As shown in
, the VFW1000 interface GigabitEthernet 3/0 is mapped to the trunk port of
the vSwitch and bound to one physical port on the host machine. The VFW1000 interface
GigabitEthernet 3/0 can receive packets with any VLAN tags.
Figure 48 Mapping the VFW1000 interface to the trunk port
IMPORTANT:
•
You can only use the bridge method to map the VFW1000 interfaces to the physical ports of the
host machine. VLAN subinterfaces cannot be created on the mapped interface on the host
machine.
•
To map the Virtio virtual NIC to a trunk port, the KVM virtual platform must support VHost.
VFW1000
KVM
Gig 1/0
vnic0
VM
Bridge0.10 /
eth0.10:macvtap
Gig 2/0
vnic1
Gig 3/0
vnic2
VM
Trunk eth0
Bridge0.11 /
eth0.11:macvtap
Bridge1
(Trunk)
eth0.10
Vlan 10
eth0.11
Vlan 11
Trunk eth1