Mapping vfw1000 interfaces to vswitch interfaces – H3C Technologies H3C VMSG VFW1000 User Manual
Page 44
39
0 ignored, 0 parity errors
Output (total): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output (normal): 0 packets, 0 bytes
0 unicasts, 0 broadcasts, 0 multicasts, 0 pauses
Output: 0 output errors, 0 underruns, 0 buffer failures
0 aborts, 0 deferred, 0 collisions, 0 late collisions
0 lost carrier, 0 no carrier
The output shows that the newly added virtual NIC is mapped to GigabitEthernet 3/0 on the VFW1000.
Mapping VFW1000 interfaces to vSwitch interfaces
You can configure the ESXi network interfaces differently to work with the VFW1000. The following
examples illustrate common mappings between VFW1000 interfaces and vSwitch interfaces.
•
As shown in
, each VFW1000 interface is mapped to an individual physical port on the
host machine.
Figure 31 Mapping each VFW1000 interface to an individual physical port
•
As shown in
, multiple VFW1000 interfaces are mapped to one physical port on the host
machine.
VFW1000
vSwitch0
vmnic0
VM
VMware
ESXi
vmnic1
vmnic2
vSwitch3
vmnic3
Gig 1/0
vnic0
Gig 2/0
vnic1
Gig 3/0
vnic2
vSwitch1
vSwitch2
VM