H3C Technologies H3C SR8800 - Manual (Page 29)

23
Figure 14 Adding IP address group 1
f. Enter the name 192.168.1.1/32, select the protocol IPv4, enter the IPv4 address
192.168.1.1/32, click <
g. In the policy application range page, click .
Figure 15 Advanced configuration
h. Select 10 from the Segment list, select the Internal Zone option, select IP address
192.168.1.1/32 from the Internal Zone IP Addresses area, and click Apply.
a. After finishing the above configuration, click OK on the page shown in Figure 12 .
# Configure ACFP filtering rule 2:
a. Select Bandwidth Management > Bandwidth Policies from the navigation tree.
b. Click Add.