H3C Technologies H3C SR8800 - Manual (Page 27)

21
Figure 10 Creating rule 1
b. Select the Specified Packets option.
c. Select All from the Protocol list.
d. Enter the source IP address 192.168.1.1.
e. Enter the source mask 32.
f. Click Apply.
# Create rule 2:
g. Click Add on the Configure Rule tab as shown in Figure 9 .
Figure 11 Creating rule 2
b. Select the Specified Packets option.
c. Select All from the Protocol list.
d. Enter the source IP address 192.168.1.2.
e. Enter the source mask 32.
f. Click Apply.
# Configure ACFP filtering rule 1:
g. Select Bandwidth Management > Bandwidth Policies from the navigation tree.
h. Click Add.