H3C Technologies H3C SR8800 - Manual (Page 21)

15
Trap message Level
ACFP client registration notifications
ACFP client deregistration notifications
ACSEI detects that ACFP client had no response warnings
ACFP server does not support the working mode of the ACFP client errors
Expiration period of ACFP collaboration policy changed notifications
ACFP collaboration rules are created informational
ACFP collaboration rules are removed informational
ACFP collaboration rules failed errors
Expiration period of ACFP collaboration policy timed out notifications
The generated traps will be sent to the information center of the router. With the parameters for the
information center set, the output rules for traps (that is, whether the traps are allowed to be output and
the output destinations) are decided. For the configuration of the parameters for the information center,
see Network Management and Monitoring Configuration Guide.
To enable the ACFP function:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enable the trap function of the
ACFP module. snmp-agent trap enable acfp
[ client | policy | rule | server ]
Optional.
Enabled by default.
NOTE:
For more information about the snmp-agent trap enable command, see Network Management and
Monitoring Command Reference.
Displaying and maintaining ACFP
Task Command Remarks
Display the configuration
information of the ACFP server.
display acfp server-info [ | { begin
| exclude | include }
regular-expression ]
Available in any view
Display the configuration
information of an ACFP client.
display acfp client-info [ client-id ]
[ | { begin | exclude | include }
regular-expression ]