H3C Technologies H3C S5800 Series Switches - Manual (Page 18)

14
Figure 6 Attach weight-bearing screws
(1) Weight-bearing screws
(2) Holes for mounting the weight-bearing screws (select one as
needed)
(3) Front panel of the RPS1600-A
(4) Front mounting bracket
4. In accordance with the RPS unit installation position in the rack, fix
the rear mounting brackets to the rear square-holed posts by using
M6 screws and cage nuts (user supplied), as shown in
Figure 7 .
(1)
(2)
(3)
(4)