H3C Technologies H3C S5800 Series Switches - Manual (Page 16)

12
Installing the RPS1600-A in a 19-inch rack
WARNING!
Disconnect the AC power before installation. For security, unplug
the power modules first, install the cabinet to the rack, and then
insert the power modules.
Mounting brackets
Figure 4 Front and rear mounting brackets
(1) Screw hole for fixing the front mounting bracket onto the cabinet
(M6 screws required, not provided by default)
(2) Screw hole for fixing the front mounting bracket to the RPS (the
screws are provided)
(3) Screw hole for fixing the rear mounting bracket onto the cabinet
(M6 screws required, not provided by default)
(1)
(2)
(3)
Front mounting bracket Rear mounting bracket