H3C Technologies H3C S6800 Series Switches - Manual (Page 27)

19
Appendixes
Appendixes A Application restrictions
Matching restrictions
VLAN matching
Table 1 describes the VLAN matching restrictions when an OpenFlow instance is associated with VLANs.
Table 1 VLAN matching
VLAN Mask Matching packets
- -
All packets in the VLANs that are associated the
OpenFlow instance.
0 -
Packets without a VLAN tag. The PVID of the ingress port
must be associated the OpenFlow instance.
0 Value Unsupported.
Valid VLAN -/Value Unsupported.
0x1000 -/Value(except non-0x1000) Unsupported.
0x1000 0x1000
Packets with a VLAN tag. The VLAN ID of the VLAN tag
must be associated with the OpenFlow instance.
Valid VLAN |
0x1000
-/Value
Matching packets by the combination of the VLAN ID
and VLAN mask. The VLANs obtained through the
combination of the VLAN ID and VLAN mask must be
associated with the OpenFlow instance.
Other Other Unsupported.
Protocol packet matching
If protocols are enabled, protocol packets (except LLDP frames) are processed by the corresponding
protocols instead of the OpenFlow protocol.
For more information about LLDP frame matching, see "
LLDP frame matching ."
Metadata matching
Metadata passes matching information between flow tables. The controller deploys metadata matching
entries only to non-first flow tables. If the controller deploys a metadata matching entry to the first flow
table, the switch returns an unsupported flow error.