Openflow configuration example, Network requirements, Configuration procedure – H3C Technologies H3C S6800 Series Switches User Manual
Page 25: Verifying the configuration
17
OpenFlow configuration example
Network requirements
As shown in
, perform the following tasks on the switch to enable OpenFlow communication with
the controller in specific VLANs:
•
Create OpenFlow instance 1, associate VLANs 4092 and 4094 with the OpenFlow instance, and
activate the OpenFlow instance.
•
Configure the controller connected to OpenFlow instance 1 to have the controller manage the
OpenFlow switch.
Figure 7 Network diagram
Configuration procedure
# Create VLANs 4092 and 4094.
[Switch] vlan 4092
[Switch-vlan4092] port fortygige 1/0/1
[Switch-vlan4092] quit
[Switch] vlan 4094
[Switch-vlan4092] port fortygige 1/0/2
[Switch-vlan4092] quit
# Create OpenFlow instance 1 and associate VLANs with it.
[Switch] openflow instance 1
[Switch-of-inst-1] classification vlan 4092 mask 4093 loosen
# Specify the IP address for controller 1 as 192.168.49.49 and activate the OpenFlow instance.
[Switch-of-inst-1] controller 1 address ip 192.168.49.49
[Switch-of-inst-1] active instance
Verifying the configuration
# Display the detailed information for OpenFlow instance 1.
[Switch-of-inst-1] display openflow instance 1
Instance 1 information: