H3C Technologies H3C S6800 Series Switches - Manual (Page 20)

12
Step Command Remarks
3. Forbid MAC address learning
for VLANs associated with the
OpenFlow instance. mac-learning forbidden
By default, MAC address learning
is allowed for VLANs associated
with an OpenFlow instance.
The configuration does not take
effect on inband management
VLANs.
This feature is applicable only to
OpenFlow instances that are in the
VLAN mode.
Forbidding an OpenFlow instance to report the specified types
of ports to controllers
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OpenFlow instance
view.
openflow instance instance-id N/A
3. Forbid the OpenFlow instance
to report the specified types of
ports to controllers.
forbidden port { vlan-interface |
vsi-interface } *
By default, all ports that belong to
an OpenFlow instance are
reported to the controllers.
Configuring the default action of table-miss flow entries
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OpenFlow instance
view.
openflow instance instance-id N/A
3. Change the default action of
the table-miss flow entry to
forward packets to the normal
pipeline.
default table-miss permit
By default, the default action of the
table-miss flow entry is to drop
packets after the OpenFlow
instance is activated and before
the controller deploys flow entries.
Setting the datapath ID
The datapath ID uniquely identifies an OpenFlow switch (OpenFlow instance). Do not set the same
datapath ID for different OpenFlow switches.
To set the datapath ID:
Step Command Remarks
1. Enter system view. system-view N/A