H3C Technologies H3C S6800 Series Switches - Manual (Page 19)

11
Step Command Remarks
2. Enter OpenFlow instance
view.
openflow instance instance-id N/A
3. Set the maximum number of
extensibility flow entries.
flow-entry max-limit limit-value
By default, an OpenFlow
extensibility flow table supports up
to 65535 flow entries.
Configuring inband management VLANs
Inband management VLANs are used to establish connections between an OpenFlow instance and
controllers.
When the inband management VLANs are configured, the data packets within the inband management
VLANs are not forwarded through OpenFlow. The ports that are assigned to only inband management
VLANs are not OpenFlow ports. Before configuring inband management VLANs, you must plan the
network.
To configure inband management VLANs:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OpenFlow
instance view.
openflow instance instance-id N/A
3. Configure inband
management VLANs. in-band management vlan vlan-list
By default, no inband management VLAN
is configured.
The inband management VLANs of an
OpenFlow instance must be within the list
of the VLANs that are associated with the
OpenFlow instance.
This feature is applicable only to
OpenFlow instances that are in the VLAN
mode.
Configuring OpenFlow to forbid MAC address learning
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter OpenFlow instance
view.
openflow instance instance-id N/A