H3C Technologies H3C S10500 Series Switches - Manual (Page 3)

Preface
The H3C S10500 documentation set includes 12 configuration guides, which describe the software
features for the H3C S10500 Switch Series and guide you through the software configuration procedures.
These configuration guides also provide configuration examples to help you apply software features to
different network scenarios.
The OAA Configuration Guide describes OAA fundamentals and configuration. It describes how to log
in to the H3C open application platform (OAP) card connected to your switch and reset the operating
system of the OAP card, and configure the ACFP and ACSEI protocols to exchange information between
your switch and the OAP card.
This preface includes:
• Audience
• Conventions
• Obtaining documentation
• Technical support
• Documentation feedback
Audience
This documentation is intended for:
• Network planners
• Field technical support and servicing engineers
• Network administrators working with the S10500 series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface Bold text represents commands and keywords that you enter literally as shown.
Italic Italic text represents arguments that you replace with actual values.
[ ] Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
{ x | y | ... } *
Asterisk marked braces enclose a set of required syntax choices separated by vertical
bars, from which you select at least one.
[ x | y | ... ] *
Asterisk marked square brackets enclose optional syntax choices separated by vertical
bars, from which you select one choice, multiple choices, or none.