H3C Technologies H3C S10500 Series Switches - Manual (Page 15)

9
To do… Use the command… Remarks
Enter system view system-view —
Enable the trap function of the
ACFP card snmp-agent trap enable acfp [ client |
policy | rule | server ] Optional
Enabled by default
NOTE:
For more information about the description of the snmp-agent trap enable command, see the Network
Management and Monitoring Command Reference.
Displaying and maintaining ACFP
To do… Use the command… Remarks
Display the configuration
information of the ACFP server display acfp server-info [ | { begin | exclude |
include } regular-expression ]
Display the configuration
information of an ACFP client display acfp client-info [ client-id ] [ | { begin |
exclude | include } regular-expression ]
Display the configuration
information of an ACFP policy
display acfp policy-info [ client client-id
[ policy-index ] | dest-interface interface-type
interface-number | in-interface interface-type
interface-number | out-interface interface-type
interface-number ] [ active | inactive ] [ | { begin
| exclude | include } regular-expression ]
Display ACFP rule configuration
information
display acfp rule-info { in-interface
[ interface-type interface-number ] |
out-interface [ interface-type interface-number ]
| policy [ client-id policy-index ] } [ | { begin |
exclude | include } regular-expression ]
Display the configuration
information of ACFP Trap display snmp-agent trap-list [ | { begin |
exclude | include } regular-expression ]
Available in any view
Configuring the ACFP client (OAP card)
You need to configure the ACFP collaboration policy and ACFP collaboration rules on the ACFP client,
which is the OAP card through MIB. The specific configuration depends on the service software used on
the ACFP client. For more information about OAP card, see the related manual of the ordered OAP card.