Rack requirements, Attaching slide rails to the rack – H3C Technologies H3C S12500X-AF Series Switches User Manual
Page 9
5
Rack requirements
Table 1 Rack requirements
Model Switch
dimensions
Rack requirements
S12516X-AF
•
Height—931 mm (36.65 in) (21 RU).
•
Width—440 mm (17.32 in).
•
Total depth—977 mm (38.46 in)
{
857 mm (33.74 in) for the chassis.
{
102 mm (4.02 in) from the mounting
bracket rear ear to the management
bracket front end.
{
30 mm (1.18 in) for the fan tray
handle at the chassis rear.
•
A minimum of 1.1 m (3.61 ft) in depth
(recommended.)
•
A minimum of 130 mm (5.12 in) from the
front rack post to the front door.
•
A minimum of 950 mm (37.40 in) from
the front rack post to the rear door.
S12508X-AF
•
Height—531 mm (20.91 in) (12 RU).
•
Width—440 mm (17.32 in).
•
Total depth—977 mm (38.46 in)
{
857 mm (33.74 in) for the chassis.
{
102 mm (4.02 in) from the mounting
bracket rear ear to the management
bracket front end.
{
30 mm (1.18 in) for the fan tray
handle at the chassis rear.
•
A minimum of 1.1 m (3.61 ft) in depth
(recommended.)
•
A minimum of 130 mm (5.12 in) from the
front rack post to the front door.
•
A minimum of 950 mm (37.40 in) from
the front rack post to the rear door.
S12504X-AF
•
Height—264 mm (10.39 in) (6 RU).
•
Width—440 mm (17.32 in).
•
Total depth—977 mm (38.46 in)
{
857 mm (33.74 in) for the chassis.
{
102 mm (4.02 in) from the mounting
bracket rear ear to the management
bracket front end.
{
30 mm (1.18 in) for the fan tray
handle at the chassis rear.
•
A minimum of 1.1 m (3.61 ft) in depth
(recommended.)
•
A minimum of 130 mm (5.12 in) from the
front rack post to the front door.
•
A minimum of 950 mm (37.40 in) from
the front rack post to the rear door.
NOTE:
H3C recommends that you use a rack that has a single door at the front.
Attaching slide rails to the rack
IMPORTANT:
The switch is heavy. Install the slide rails at the lowest possible position.