H3C Technologies H3C S12500X-AF Series Switches - Manual (Page 38)

34
Figure 33 Installing a fan tray (S12516X-AF switch)
(1) Align the fan tray with the fan tray slot (2) Fasten the captive screws
Installing fan trays for the S12504X-AF switch
1. Orient the fan tray correctly.
To install a fan tray in the FAN1 slot, orient the fan tray so that the LEDs are on the left side of the
front panel. To install a fan tray in the FAN2 slot, orient the fan tray so that the LEDs are on the
right side of the front panel.
2. As shown by callout 1 in Figure 34 , align the positioning pin on the fan tray with the positioning
hole in the chassis.
3. As shown by callout 2 in Figure 34 , hold the fan tray handle and insert the fan tray into the slot.
Keep the fan tray as straight and stable as possible while inserting it into the slot.
4. As shown by callout 3 in Figure 34 , fasten the captive screws on the fan tray.