H3C Technologies H3C S12500X-AF Series Switches User Manual
Page 49
45
............................................................................
....................................Done.
Loading file flash:/S12500X-AF-CMW710-DEVKIT-R1110.bin....Done.
Loading file flash:/S12500X-AF-CMW710-MANUFACTURE-R1110.bin...Done.
Loading file flash:/S12500X-AF-CMW710-BOOT-R1110.bin........................
............................................................................
.......................Done.
Image file flash:/S12500X-AF-CMW710-BOOT-R1110.bin is self-decompressing....
............................................................................
.....Done.
System image is starting...
Line aux0 is available.
Press ENTER to get started.
Press Enter at the prompt. When the prompt
appears, you can configure the switch.
After the switch finishes startup, verify the following items:
•
The cooling system is working, and you can hear fan rotating noise and feel air being blown out.
•
The LEDs on the MPUs show that the system is operating correctly. For more information about LEDs,
see H3C S12500X-AF Switch Series Installation Guide.