Ensemble Designs BrightEye Mitto Scan Converters - Manual (Page 31)

BrightEye Mitto Family - Page 31
Mitto Family of Scan Converters User Guide
www.ensembledesigns.com
DVI/VGA Input
Connect the DVI output of your computer monitor to Mitto’s DVI/VGA input. Mitto’s DVI/VGA Input
and the DVI/VGA Loop Out use DVI-I (integrated) connectors which provide both digital and analog
connectivity. The larger group of pins are digital while the four pins on the right are analog.
If your computer has VGA out, use the VGA-to-DVI adaptor that is included with your Mitto (shown
below).
HDMI is supported with an HDMI-to-DVI adaptor or cable (not included). The HDMI standard provides
for carriage of both digital video and audio. Mitto supports two channels of digital audio from HDMI
sources.
DVI/VGA Loop Out
If desired, connect the DVI/VGA Loop Out to the DVI input of your computer monitor.
If your computer monitor has VGA in, use the DVI-to-VGA adaptor that is included with your Mitto.
HDMI is supported with a DVI-to-HDMI adaptor or cable (not included).
Example of a DVI-to-DVI cable
Example of a DVI-to-HDMI adaptor, DVI end Example of a DVI-to-HDMI adaptor, HDMI end