Ensemble Designs BrightEye Mitto Scan Converters - Manual (Page 12)

BrightEye Mitto Family - Page 12
Mitto Family of Scan Converters User Guide
www.ensembledesigns.com
The built-in audio mixer provides for level adjustment, channel tie, and output assignment controls
for up to four channels of output. If you use the audio control on Mitto’s front panel, the slider controls
will automatically tie together.
The audio appears in the embedded SDI outputs and, if desired, can also be output as AES on the
Composite Out BNC.
RS-232 and GPI Control
Mitto’s RS-232/GPI port is dual functioning. In the Config Menu you can set the function of the
RS-232/GPI connector to Console or to Memory Regs.
When set to Memory Regs, the D connector provides GPI outputs for use with an external control
panel, such as the Ensemble Designs Avenue GPI Control Panel (part number XYCP). External control
panels provide recall only, they cannot memorize settings.
When set to Console, the D connector provides RS-232 control for an external device to control Mitto,
such as AMX or Crestron.