Epson Apex-80 - Manual (Page 96)

ESC S l
Format:
ASCII code: ESC S SOH
Decimal: 27 83
1
Hexadecimal: 1 B 53 01
Comments:
Select Subscript Mode
Prints characters about two-thirds of the normal height in the lower
part of the character space. The ASCII code 1 or the character “1”
can be used in this command. It is cancelled with ESC T.
ESC T Cancel Superscript/Subscript
Format:
ASCII code: ESC T
Decimal: 27 84
Hexadecimal:
1B 54
Comments:
Cancels either superscript or subscript.
ESC - Turn Underlining Mode On/Off
Format:
ASCII code: ESC - n
Decimal: 27 45 n
Hexadecimal: 1B 2D n
Comments:
The following values can be used for n:
1: Mode is turned ON. (The characters “0” and “1”
0: Mode is turned OFF. can also be used.)
This mode provides continuous underlining, including spaces.
Command Summary A-25