Epson Apex-80 User Manual

Page 21

3. When the legs are in the slots, lean the guide all the way back. The

guide should rest atop the paper entering the printer, separating it

from paper exiting the printer.

Setting top of form

Now you are ready to set the top of form position. Follow these

steps:

1. Turn the paper feed knob to advance the paper until a perforation

between pages is just below the top of the ribbon,

2. Now replace the front lid.

Your printer should now be set up as shown in Figure 1-15.

Figure 1-15.

The

printer with

continuous-feed paper

When you turn on your Apex80, it remembers this top of form

setting and uses it when any program tells it to move to the top of the

next page. If you later find that your word processing or other

application program prints too high or too low on the page or is

printing on the perforations, check to see that your top of form setting

is correct.

1-14

Setting Up