Epson Apex-80 - Manual (Page 83)

ESC C 0 Set Page Length in Inches
Format:
ASCII code: ESC C NUL n
Decimal: 27 67 0 n
Hexadecimal:
1B 43 00 n
Comments:
Sets the page length to n inches. The value of n must be from 1-22.
The top of form position is set to the current line.
ESC N Set Skip-over-perforation
Format:
ASCII code: ESC N n
Decimal: 27 78 n
Hexadecimal: 1 B 4E n
Comments:
The variable n is the number of lines skipped between the last line
printed on one page and the first line on the next page. For
example, with the standard settings for line spacing (l/6-inch), and
page length (66 lines), ESC N 6 causes the Apex80 to print 60 lines
and then skip 6. DIP switch 2-3 performs the same function. This
setting is cancelled by ESC O and also by ESC C or ESC C NUL.
The value of n must be from 1-127.
ESC O Cancel Skipover-perforation
Format:
ASCII code: E S C O
Decimal: 27 79
Hexadecimal: 1 B 4F
Comments:
Cancels the skip-over-perforation set by ESC N. Overrides the
setting of DIP switch 2-3.
A-12 Command Summary