Epson Apex-80 User Manual

Page 24

3. Align the left side of the left edge guide with the guide mark on the

paper guide. See Figure 1-17. You may later wish to adjust this edge

guide depending on the margin setting in your application program.

Figure 1-17.

Guide mark for paper alignment

Automatic paper loading

Now you are ready to load single-sheet paper using the Apex80’s

AUTO LOAD

feature.

To load paper automatically, just follow these steps:

1. Push back the paper release lever. (See Figure 1-16.) The single-arrow

icon behind the lever marks the position the lever should be in for

loading single-sheet paper.

2. Turn on the printer.

3. Make sure that the

ON LINE

indicator is off. If it is not off, press the

touch-sensitive panel labeled

ON/OFF LINE.

4. Adjust the right edge guide to fit the sire of the paper.

5. Slide the paper down through the edge guides until it meets

resistance. Press down on the paper a bit more to make sure that it

is firmly in place, as shown in Figure 1-18.

Setting Up

1-17