Epson Apex-80 - Manual (Page 137)

Appendix F
Technical Specifications
This appendix contains the specifications for the Apex80, including
the built-in parallel interface.
Printing
Printing method
Impact dot matrix
Printing speed
180 characters per second in draft elite
150 characters per second in draft pica
25 characters per second in NLQ pica
Printing direction
Bidirectional logic-seeking for text printing
Unidirectional for graphics and by software command for text
Character sizes
All except superscript and subscript are 3.1 mm high. The widths
and characters per inch (CPI) are given below:
Mode Width (mm) CPI Mode Width (mm) CPI
Pica 2.1 10 Condensed Pica 1.05 17
Elite 1.5 12 Condensed Elite 1.05 20
Line spacing
l/o-inch, or programmable in increments of 1/216th of an inch
Paper
Number of copies
One original plus two copies; total thickness not to exceed 0.01 in.
(0.25 mm)
Paper width
Continuous feed:
Single-sheet:
4 to 10 in.
7.15 to 8.5 in.
Technical Specifications F-1