8. test menu test menu – ATL Telecom AM64/512 User Manual

Page 13

telecom

User Guide

High Speed Modems

7.3

7.3 Menu Lock

Menu Lock

To toggle the menu locking options, press the ò key until; is displayed then,

Press and hold in the SELECT button

While keeping the SELECT button pressed, press and hold the ò button

While keeping the SELECT and ò button pressed, press the button until the desired setting is found

The user can apply all tests and change Option and Config settings

The user can apply all the tests but only view the Option and Config settings

The user can only view present settings and cannot make any changes

When the desired setting is found, release all the buttons.

8. Test Menu

Test Menu

The ñ and ò keys move through the items in the menu. All actions in this menu are set automatically.
The SELECT (SS) key changes the state of each item.
The test menu has the following lines:

8.1

8.1 Local Loop

Local Loop

This allows the local modem to apply a loop to redirect the data back to the customer interface (loop 3c).
This loop can be applied in conjunction with a Loopback, but not the Remote Loop. If Local Loop is On, the
Remote Loop and Data Test items will not be visible in the Test Menu.

8.2

8.2 Loopback

Loopback

This instructs the modem to apply a loop to redirect the data back to the remote modem, (loop 2b). This
loop can be applied in conjunction with a Local Loop but not the Remote Loop. If Loopback is On, the
Remote Loop and Data Test items will not be visible in the Test Menu.

8.3

8.3 Remote Loop

Remote Loop

This instructs the modem to apply a loop at the Remote end.
If the Remote Loop is On, the Local Loop and Loopback items will not be visible in the Test Menu.

8.4

8.4 Data Test

Data Test

T> Local Loop OFF

T> Loopback OFF

T> Local Loop ON

T> Loopback ON

T> Rem Loop OFF

T> Rem Loop ON

S> Menu Unlocked

S> Menu Locked

S> Menu Limited

S> Menu Xxxxxxxx