MOCET IP3072 - Manual (Page 69)

Page 69 Page 69
MOCET IP3072 Smart Office IP Desk Phone User Guide
5. Using Advanced Call Features
5.1 Call Waiting
The call waiting feature notifies the user on an active call of a new incoming call. You can
disable the call waiting feature, so that the new incoming call is automatically rejected by
the phone with a busy message.
If you disable call waiting on the phone, and the user is on a call, any further incoming
calls receive busy unless “Call Forward Busy” is configured on the phone, where it then
forwards the call according to the configured destination.
5.2 Intercom Call
5.2.1 Answering an Intercom Call
By default, the IP phone allows incoming intercom calls to be automatically answered on
your phone. If the intercom call comes into the phone while an active call is already
present, the phone puts the active call on hold and answers the intercom call.
5.2.2 Placing an Intercom Call
The Intercom call feature depends on PBX/SIP Server as there are different intercom call
codes for each servers; for example, the Asterisk default intercom code is “*80”.
To place intercom call on an Asterisk server, you may just make a call to “*80”+
[destination number] (“*801001” for example). For other phone systems or hosted SIP
services, please contact your administrator or Service Provider for more information.