MOCET IP3072 - Manual (Page 10)

Page 10
MOCET IP3072 Smart Office IP Desk Phone User Guide
1.3 Installation and Setup
The IP3072 can support three different tilt angles of 60°, 51°, and 30° (see below).
1.3.1 Attaching the Stand to the Phone:
After unpacking the box, attach the stand to the IP3072 phone first. Below this paragraph
we illustrate an example below of 60° angle installation with the stand. There are three
sets of “antlers” on the top of the stand (named 1, 2 and 3) and there are three sets of
mounting slots on the back of the phone (named A, B and C). See the illustration below.
The procedures for attaching the stand to the phone are as follows:
Step 1: Place the main body of the IP3072 face down on your lap or a firm sofa;
Step 2: First snap the “2nd” antler into the slot “B” hole;