ARAG SERIE 4663 Electric Control Box 7 - 9 - Manual (Page 6)

6
4 LOCATION ON THE MACHINE
4.1 Location of the control box
4.1.1 Location advice and precautions
• Control boxes are intended to be located on the machine in the control cab, in a visible and easy-
to-reach position so as to allow the operator to control the spray area during operation without
blocking his view.
• Note the various connections required for the device to operate, the necessary length of the cables,
and ensure that there is suffi cient space for the cable runs and connectors.
• Do not locate the control box near to moving parts or in areas subject to harsh
vibrations or collisions to avoid damaging the box or activating the switches
involuntarily.
4.1.2 Mounting the bracket
The control box must be mounted on a bracket installed at the desired location, using the latter as
a drilling template (Fig. 2).
The bracket can be removed by undoing the knobs (take care not to lose the nuts and washers)
and installed with M8 bolts (not supplied).
If the bracket has been removed, mount it securely in position, install the box to it and lock down
the mounting knobs.
Do not use any system other than the provided bracket for mounting the control box.