ARAG SERIE 4663 Electric Control Box 7 - 9 - Manual (Page 4)

4
• FOREWORD AND GUIDE TO THE MANUAL
This manual contains the information needed to assemble and connect the series 4663 control
boxes.
All other information is provided on special sheets, to be used only by the installer, which include
specifi c data for each single model.
• USING THE MANUAL
This manual contains information reserved for the installation technician, and hence makes use
of technical terminology without the explanations which would otherwise be required by the end
user.
INSTALLATION IS TO BE DONE ONLY BY AUTHORISED AND TRAINED TECHNICAL
STAFF. THE MANUFACTURER IS NOT LIABLE FOR USE OF THIS MANUAL BY UN-
AUTHORIZED AND UNQUALIFIED PERSONS.
• RESTRICTIONS
Assembly steps are described with reference to a “generic” control box and therefore no specifi c
models will be referenced unless a specifi c installation operation involves a single model.
• RESPONSIBILITIES
The installation technician is responsible for implementing the installation procedure in a professional
manner so as to guarantee perfect functionality of the computer, whether supplied solely with
ARAG components or with components from other manufacturers.
ARAG recommends using its own components for the installation of the control systems.
If the installation technician should decide to use components provided by other manufacturers,
even if this should not require the modifi cation of the cabling or other systems, he does so at his
own exclusive risk and liability.
The installation technician is responsible for compatibility with components and accessories pro-
vided by other manufacturers.
If, as a consequence of the above recommendations, the computer or other ARAG components
installed in combination with components provided by other manufacturers should suffer damage
of any kind, no form of liability, whether direct or indirect, will be recognized by ARAG.