ARAG SERIE 4663 Electric Control Box 7 - 9 - Manual (Page 5)

5
1 RISKS AND PRECAUTIONS BEFORE ASSEMBLY
All installation work must be done with the battery disconnected, using suitable
tools and any individual protection equipment deemed necessary.
Use ONLY clean water for treatment tests and simulations: using chemicals
during simulated treatment runs can seriously injure persons in the vicinity.
2 INTENDED USE
The control box is a device which, when connected to a valve or suitable control unit, makes it
possible to control all phases of treatment in agricultural applications directly from the cab of the
agricultural machine in which it is installed.
This device is designed to work on agricultural machinery for crop spraying applica-
tions.
The unit is designed and constructed to comply with directive 89/336/EEC
of 03/05/1989 and all its subsequent modifi cations, and to EN ISO 14982
(Electromagnetic compatibility - agricultural and forestry equipment).
3 CONTENTS OF THE PACKAGE
The following table lists the components contained in the control box package:
Fig. 1
Legend:
1 Control box
2 Extension cable
3 Instructions
4 Digital
display cable
5 Power cable
6 Terminal cable for valve
connection