Allstar Performance ALL48016 - Manual (Page 4)

Allstar Performance 8300 Lane Dr., Watervliet, MI 49098
Phone: (269) 463-8000 Fax: (800) 772-2618 www.allstarperformance.com
Form 1028 Page 4 of 4 Rev. 012512
FIGURE 1
Line From Master Cylinder
Inlet (x1)
Outlet Ports (x3)
Splice
Switch Wire
Switch Wire
12 Volt Positive
Source
Fuse
Negative
Ground
(Black Wire)
Solenoid
Valve
Red Wire
Indicator
Light
Existing Brake
Light Wires
Brake Light Switch:
Connect two lengths of 18 gauge
wire to the stock wires connect-
ing switch.
If stock switch has one terminal
only, run a length of 18 gauge
wire from this terminal to a con-
tact of the hydraulic brake light
switch. Ground other contact of
hydraulic brake light switch.
Option:
ALL76251
ALL76252
Hydraulic
Brake
Light Pressure
Switch
Roll Control Switch
Optional Components
Part Number
Description Qty. Per Package
ALL50120 1/8" NPT To 3/16" Inverted Flare 4
ALL50121 1/8" NPT To 1/4" Line 4
ALL50130 3/16" Inverted Flare Union 4
ALL50182 1/8" NPT Brass Plug 4
ALL50183 3/16" Inverted Flare Steel Plug 4
ALL76251 1/8" NPT Brake Light Switch - Pressure (Male Bullet Terminals) 1
ALL76252 1/8" NPT Brake Light Switch - Pressure (6-32 Screw Terminals) 1
Racer Tip:
Any of the three outlet
ports can be used with
a brake pressure gauge.