Alinco DJ-100 - Manual (Page 44)

Professional
FM Transceiver
27
By transmitting preprogrammed STUN code, the radios that received the code
will become temporary out-of-service except for receiving. When STUN code is
received, STUN is displayed and all keys and functions will be suspended for
use.
To wake up (revive) the radios again, send the STUN code with
# at the
end. Example: If 5678 is the STUN code, send 5678# to revive. It displays
" WAKEN" when revive code is received. Turn off and turn on to operate.
In case receiving signal is excessively strong that bothers hearing, ATT may
become useful.
1. Press A key, the top left corner displays " " icon.
2. Press
key, ATT icon appears on the left bottom and ATT is on.
3. Repeat above to exit and ATT icon disappears.
RF Attenuator (ATT)
Remotely Stun /Waken
To wake up (revive) the radios again, send the KILL code with # at the end.
Example: If 1234 is the KILL code, send 1234# to revive. It displays " WAKEN"
when revive code is received. Turn off and turn on to operate.
ADVANSED OPERATIONS