Basic operations – Alinco DJ-100 User Manual

Page 34

Professional

FM Transceiver

Side Key [PF2] Function

Switching between VFO and Memory Mode

Monitor function (squelch off or momentary off per preprogramming).
1. Turn the main dial while pressing and holding this key to set the squelch level.
2. While transmitting, press this key to transmit preprogrammed 2-tone,5-tone or DTMF tone signaling.
3. Pressing and holding this key while turning on for 2 seconds to enter to the parameter setting mode.
4. Turn on with this key and

key pressed together to perform the factroy reset. All icons will appear

then after 2 seconds the display resumes with showing 155.000,

In main channel, Sub channel or FM broadcast mode, press

key to switch between frequency

mode (VFO) and Memory mode.

Note: Reset may be prohibited by the dealer programming.

●

Note: When the channel hasn’t been preprogrammed, this operation is unavailable. VFO mode may not

●

be available in some countries of distribution due to regulations.

BASIC OPERATIONS

2.In receiving mode, press and hold to alarm.(you can shut off this function by software)
3.In transmitting mode, press to transmitting selected Tone-pulse signaling.
4.Press this key to power on transceiver, and get into wire cloning mode.

This manual is related to the following products:

DJ-W100