ACTi Indoor Hemispheric / Fisheye Dome on Straight Wall - Manual (Page 9)

www.acti.com
Installation Guide
9
Step 6: Connect to Network
On the network side, connect the other end of the Ethernet port to a switch or injector. Then,
connect the switch or injector to a network PC and a power source. See Power-over-Ethernet
(PoE) connection example below.
Network
AC Power
Source
PoE Injector /
Switch
Power Cable
Ethernet Cable
Ethernet Cable
(Data + Power)
Ethernet Cable
(Data)
Camera
Step 7: Access the Camera Live View
Refer to the camera Hardware Manual downloadable from the website ( www.acti.com ) for more
information.