ACTi Indoor Hemispheric / Fisheye Dome on Straight Wall - Manual (Page 8)

www.acti.com
Installation Guide
8
4. Connect the Ethernet cable from the network side to the Ethernet port of the bundled network
cable.
5. If using an audio input device, such as a microphone with a built-in amplifier, connect the
device jack to the RED jack of the bundled audio cable. If using an audio output device, such
as a speaker, connect the device jack to the GREEN jack of the bundled audio cable.
Note: Make sure that the connected audio input device has a built-in amplifier. Connecting an
ordinary microphone will dwarf sounds and will result in inaudible recording.
Network Side
Ethernet Port of
Camera Network Cable
Audio Input Jack
Audio Output Jack
Audio Device