Westermo RM-505U-2-E - Manual (Page 37)

User Manual
MAN_505_1.7.DOC Page 37
•
From the Utilities menu, select “Serial Port Setup”
•
Select the appropriate serial port (COM1 - COM4)
•
Select the unit to be configured from the left-hand menu
•
Click on the “Program Unit” button.
You will be asked to confirm if the module already has a different system or unit address.
Each module will need to be programmed individually.
4.9 Loading Configuration from a Module
Care should be taken when loading a configuration from a module. It is easy to lose the system
address and unit address. We suggest that you first view the system address and unit address -
you can do this via the “Unit Options” menu. Note these addresses before loading the
configuration.
When you upload the configuration, the program will check if you want to load the addresses from
the module. If you do not, then the system address and unit address will change.
4.10 Print Options
You can obtain a print-out of each module configuration. On each unit display, there are “Unit
Summary” and “Mapping Summary” windows. Each of these will display a printable information
page about that module. The Unit Summary page will display the user options configured, and the
Mapping Summary will display the mappings entered for that unit.
The printer may be selected from the Printer Setup option in the File menu.