Welltech WellBG 5800 V.1.3 - Manual (Page 23)

Welltech Computer Co., Ltd.
Boarder Gateway 5800 - 23 -
Figure 3.5-1
Parameter Description:
• IP Address: WellBC 5800 real IP address
• IP Netmask: IP netmask
• IP Gateway: IP gateway
• Active Count: The active node count for this HA cluster. If
you have 6 SBC doing the HA, normally you will set “Ac-
tive Count” to 5 and Standby Count to 1 which is 5+1.
• Standby Count: The standby node count for this HA clus-
ter. Normally, this count will be 1.
• Application Preferred Role: The preferred mode of this
node is Active or Standby. When you set it to Active,
WellBG 5800 will try to make this node to become Active
first. For an N+1 redundant architecture, please set N
SBCs to “Active” and 1 to “Standby”.
• Cluster: Unique name to identify the HA cluster. All of
nodes should use the same cluster name or it will not
work correctly. The name should not contact any special
digits like space or @.
• Preferred Role: Please set the preferred active node to be
manager and another to standby manager. It is recom-
mended to set 1 SBC to “manager” and others to “standby
manager”.
Click the Virtual IP > New button to create an IP:
Figure 3.5-2