Welltech WellBG 5800 V.1.3 - Manual (Page 18)

Welltech Computer Co., Ltd.
Boarder Gateway 5800 - 18 -
proxy2xxRcvdTimer before the transaction terminates. (de-
fault: 10000 ms)**
Use Rport Param In Via: Rport is short for Received Port
which is a parameter in Via Header.
Send Receive Buffer Size: The buffer size used by the SIP
Stack for receiving and sending SIP messages.
Register Guard Time: The Register Guard time
Max Transactions: The maximum transaction
Reject Unregister Call: Reject any unregister call or not
Support Video: Enable video RTP Proxy or not. Enable video
will great reduce the number of concurrent channel and
bandwidth.
Call Validation Method: Call Valid Check Method: ReInvite,
Update or disable
Authentication Failure Protect Timer: The Authentication
Failure protect timer
Call Validation Timer: The timer to check periodically call is
valid or not.
RTP Reserve Policy:
- Called Party: Reserve RTP in called party (please use
only on Welltech’s instruction)
- Calling Party: Reserve RTP in calling party (recom-
mended mode)
Call Failure Reason: The following SIP reason code will be
considered the call is broken or not when WellBG is doing the
call validation.
- When Receiving 481: Only receive 481 response code
will be considered it is a broken call for call validation.
- All non 2xx: All of non 2xx response code will be consid-
ered it is a broken call for call validation.
WebCaller: Support Web call. To allow web caller can dial
without register or not (Welltech Web call service only)
Advance System Configuration:
Start Path: Configuration > System > License
Figure 3.1-3