Welltech WellBG 5800 V.1.3 - Manual (Page 20)

Welltech Computer Co., Ltd.
Boarder Gateway 5800 - 20 -
IP: The local gateway IP that the SBC 5800 connected to
Port: The local gateway port
Sync To Addr: Make the SIP to address to become gateway’s
IP instead of SIP domain or not. It is recommended to set to
TRUE.
Click Local G/W -> L/DM button to set the local digit manipula-
tion for the call to local gateway.
Figure 3.1-6
Parameter Description:
Match Prefix: Called number party matched
Start Position: Start position to be replaced
Stop Position: Stop position to be replaced
Replace Value: Replaced value
Click the IN Route button:
Figure 3.1-7
Parameter Description:
Routed Phone Number: The register phone number that the
call from gateway will be routed to when the Proxy or network
is down.
Debug Configuration
Debug can be turn on or off based on each system module
and level to minimum the debug information. Please only turn
on the debug information for debug purpose under Welltech
FAE's instruction and turn off when complete. Or the sys-
tem performance will be greatly hit.