Welltech WellBG 5800 V.1.3 - Manual (Page 19)

Welltech Computer Co., Ltd.
Boarder Gateway 5800 - 19 -
License Parameter Description:
Feature: System parameter
Serial No: System parameter
License Key: System parameter
☺Note: Please do not change it unless under Welltech’s instruction.
Click the Local G/W button:
To allow connect to a local PSTN gateway; click “Local
G/W” to add a PSTN gateway as follows. The local PSTN
gateway will also be used for local surviving.
Figure 3.1-4
Create a new item by clicking the New button:
Figure 3.1-5
Parameter Description:
Type: The type of the call
- In: The gateway type is for incoming call only for local
surviving. When network is failed or soft-switch is down
and client SBC is enabled, the incoming call will be route
to dedicate subscriber in System -> In Route.
- Out: The gateway type is used for PSTN outgoing. To
control the PSTN outgoing right, you can set the “Route
to G/W” to “all” or “SBC user only”. It is recommended to
set to SBC user only. The SBC will only accept the calls
dialed out the gateway.
- Both: The gateway supports both incoming (IN) and
outgoing (OUT) services.