Epson 650 - Manual (Page 30)

Getting Photos Into Your Computer 4-6
PhotoPC 650 U/G
Rev. C
A5 size INTOP.fm
6/21/00 Pass 0
R Proof Sign-off:
KOW E.Yamanouchi K.Pipa_______
M.Fujimori
_______
K.Pipa _______
Selecting pictures to transfer
There are three ways to select pictures to transfer.
❏ Clicking an individual picture
❏ Holding down the Shift or Ctrl key (Windows), or
the J key (Macintosh), and clicking multiple
pictures
❏ Clicking the Select All button to select all the
pictures
Your selected pictures are outlined in red.
Note:
To permanently erase a picture from your camera, select it
and click Erase, then confirm the erasure.
Once you have selected pictures, you are ready to
transfer them to your camera. See the next section.
Transferring pictures from the camera to your
computer
You can use the Save to Folder button or the Transfer
button to transfer your pictures from your camera to
your computer.
❏ The fastest method is using the Save to Folder
on the Camera Content tab. This lets you
transfer your pictures and save them directly to a
selected folder on your hard disk, saving battery
power and time. See the next section for
instructions.
❏ You can also use the Transfer button on the
Camera Content tab to import your pictures
into HotShots. This stores the pictures in your
computer’s RAM (memory), not on your hard
disk. See page 4-8 for instructions.
Note:
If your camera shuts off automatically while you are
transferring pictures (to save battery power), click the
Open Camera button on the TWAIN or Plug-In dialog
box to turn it back on.