13b. wcc iii - mcd2 installation guide, Mcd-menu program – WattMaster WCC III part 14 User Manual
Page 29
13B. WCC III - MCD2 INSTALLATION GUIDE
WCC III Technical Guide
13B-27
MCD-Menu Program
Restore BackTask data Files to USB
Drive (Choice #4)
This subprogram will copy all of the useful WCC III data fi les from
a USB drive (User / Contractor provided), assuming that there is
a USB drive plugged into the USB port on the WCCIII-MCD2. It
will copy all of these fi les to the /opt/Backtask subdirectory of the
WCCIII-MCD2 solid state SATA hard drive.
If there is not a USB fl ash drive in the USB port on the bottom
of the WCCIII-MCD2, this program assumes that there is a USB
drive there even if it is not there. It will not report that there is
a drive reading or writing error, or any other errors. So when
restoring data fi les, make sure that there is a USB fl ash drive in the
USB socket port on the bottom of the WCCIII-MCD2. There is
an LED on this USB fl ash drive that should light up when data is
written or read from it. Please verify that this LED operates when
restoring data from this USB fl ash drive.
All WCC III jobsites have multiple specifi c custom data fi les that
are the responsibility of the end user and or mechanical contractor.
Any loss or the retention of these jobsite specifi c custom data fi les
are not within WattMaster Controls, Inc. liabilities.
The following will be displayed on the screen:
Selecting Restore BackTask Files from USB Drive.
Restoring .dat fi les.
Copying fi le: /media/usb/AlarmBits.dat
Copying fi le: /media/usb/AlarmMessage.dat
Copying fi le: /media/usb/DutyCycleSchedule.dat
Copying fi le: /media/usb/EnergyConsumption.dat
Copying fi le: /media/usb/GeneralMessage.dat
Copying fi le: /media/usb/GlobalAnalog.dat
Copying fi le: /media/usb/GlobalBinary.dat
Copying fi le: /media/usb/HolidaySchedule.dat
Copying fi le: /media/usb/LookUpTable.dat
Copying fi le: /media/usb/NetworkInformation.dat
Copying fi le: /media/usb/OperatorCode.dat
Copying fi le: /media/usb/OptimalSchedule.dat
Copying fi le: /media/usb/OverrideSchedule.dat
Copying fi le: /media/usb/PidProgram.dat
Copying fi le: /media/usb/ProportionalReset.dat
Copying fi le: /media/usb/ShedRestoreSchedule.dat
Copying fi le: /media/usb/StatusMessage.dat
Copying fi le: /media/usb/SystemParameter.dat
Copying fi le: /media/usb/table.dat
Copying fi le: /media/usb/TenantEvent_001_2009_09.dat
Copying fi le: /media/usb/TenantEvent_004_2009_10.dat
Copying fi le: /media/usb/TenantOverride.dat
Copying fi le: /media/usb/TenantOverrideRecord.dat
Copying fi le: /media/usb/UnitMessage.dat
Copying fi le: /media/usb/WeekSchedule.dat
Done copying .dat fi les.
Copying SlideFiles.
Done copying SlideFiles.
Copying WGGC fi les.
Done copying WGGC fi les.
Returning to Main Menu.