Watson-Marlow 505Di - Manual (Page 19)

19
English
* Volume dosing using 501RL, 1.6mm bore tubing. Pumphead/tubing selection screens vary according to selection
required.
A.
Switch on power to drive
B.
User decision to calibrate
C.
Indication of head and tubing to which pump is currently calibrated
D.
If set-up not correct change existing set-up
E.
Select head and tubing
F.
Choose the pumphead required
G.
Choose the tube size. Selection confirmed
H.
Select Dose from Main menu
I.
Set a new dose program
J.
Set the volume or weight to be dosed
K.
Set the time interval between doses
L.
Set the number of doses to be dispensed
M.
Set the pump speed or volume flow rate
N.
Proceed to dose with using set parameters
O.
Verification of interval between doses and pump speed
P.
Verification of volume and number of doses, press Start