Watson-Marlow 505Di - Manual (Page 14)

14
505L Care and maintenance
Check all moving parts for freedom of movement occasionally. If aggressive fluids are split onto the pumphead, remove
from drive and clean using a mild detergent only.
505L Track adjustment
The track is set for 2.4mm wall tubing up to 9.6mm bore. Alteration of this setting using the pan head screws may be
necessary to optimise performance if non-standard tubing is used. The factory setting is 14.5mm vertically from the rotor
side of the sprung track to the top of the track cover.
505L Pumphead spares
Number Spare Description
1 MNA 0371A Rotor Assembly
2 BB 0014 Drive shaft bearing
3 MNA0338A Adaptor plate
4 MN 0862S Cover plate
5 MNA0339A Locating peg (2 off)
6 MNA0333A Track assembly
7 059.4001.000 505L tube clamp set. (6 pairs of 2 clamps)
8 MN 1029C End plate