Vuzix M100 Product Guide - Manual (Page 22)

425PB0002-02
22
Voice Navigation
Voice navigation is supported by the Smart Glasses when used in conjunction with
compatible voice command enabled software. A microphone located behind the
display arm picks up voice commands.
If voice control is turned on the Mic
icon is present on the status bar of
the M100, and the M100 is always
listening for the ‘Voice On’
command. If you say ‘Voice On’, the
Mic will go from grey to green
showing the M100 is now listening
for a voice command. By default,
after 15 seconds of not hearing any
voice commands, the Mic icon will
return to grey, and the M100 will
stop listening for any command
other than ‘Voice On’ and wait to be re-enabled. The 15 second default timeout can
be adjusted through the Settings application under Voice. The range is in seconds
with zero (0) being always listening. The list of recognized voice commands is growing
constantly and may vary from one program to another. Examples of some basic
commands recognized by the pre-installed M100 software are provided below. See the
Vuzix website for additional commands and other software documentation for 3 rd
party apps.
Voice on – enable voice control (The M100 is always listening for this
unless voice control is selected to be turned off)
Voice off – disable voice control (automatically disables after 20seconds
with no voice action)
Voice help – displays a list of possible words the current application
understands for about 5 seconds
Scroll left – scroll to the left